Active VR Speed Sensors - EMI Susceptibility Hardened

Type
Variable Reluctance (Magnetic) with EMI susceptibility hardening

Physical Features

• Body material: 300 series stainless steel
• Encapsulation: epoxy potting
• High Shock and Vibration resistance: MIL-STD-202G METHOD 214A, Test Condition H

Input Power

• 5 to 30 VDC, 25 mA max. @ 30VDC
• Reverse polarity protected

Pulse Output Options
Guaranteed power on state at Logic 0

• Supply Tracking
  Guaranteed power on state at Logic 0
  Logic 0:
  0.35 VDC Max @ 15VDC
  0.80 VDC Max @ 30 VDC
  Logic 1:
  (VS x RL)/(RL+2200)
  Open Collector
  Logic 0:
  0.35 VDC Max @ 15VDC
  0.80 VDC Max @ 30 VDC
  Logic 1:
  (VS x RL)/(RL+Y*)

*Y=value of external pullup resistor

• TTL/CMOS: fan-out of 5 TTL/CMOS loads
  Logic 0:
  0.35 VDC Max @ 15VDC
  0.80 VDC Max @ 30 VDC
  Logic 1:
  5 VDC +/- 0.5 VDC
  0-10 VDC square wave (requires 10-30 VDC input power)
  Logic 0:
  0.35 VDC Max @ 15VDC
  0.80 VDC Max @ 30 VDC
  Logic 1:
  10 VDC +/- 1.0 VDC

Interconnection Options

• Three (3) pin MIL-C-5015 type connector with gold plated pins; mates with MS3106-10SL-3S
• M12x1 threaded 5 pin connector
• Other connector types upon request
• Pigtail with wires or cables.
  NPT threaded body with wire or cable pigtail

Temperature Range

• Operating: -40˚C to +125˚C
• Storage: -65˚C to +125˚C

Pin/Pigtail Connections

• Pin A (Red): Input Power (+)
• Pin B (Black): Common (-)
• Pin C (White): Pulse Output (+)

Airgap
Up to 0.140″ dependent on target geometry and sensor construction.

Approvals
CE compliant to EMC Directive 2004/108/EC for use in residential, commercial, light industrial and heavy industrial environments.